Venues

Drawing venue maps

Venue maps let you draw a plan of a fishery — marking pegs, features, depths, and other useful reference points. Maps are saved to the venue and can be shared with friends on the platform.

To create a map

The Oakford Pools venue map shows saved peg and depth markers and provides the controls for adding or reviewing map features.

  1. Open a saved venue from the Venues screen
  2. Tap View Map
  3. Use the toolbar at the bottom to switch between modes:
    • View — move around the map freely without editing. Tap any existing pin to see its details and quick-action links.
    • Pin — drop a marker at a specific location (see Pin types below).
    • Line — draw a line between two points (see Drawing lines below).
    • Delete — tap any pin or line to remove it.

Tap Save after making changes to store them against the venue.

For the deeper workflows, see Depth pins and depth profiles and Mapping swim photos. This overview covers the map itself; those companion articles explain how readings, photos and linked pins work together.

Approximate venue location and precise pins

Postcodes and ZIP codes are supported for venue mapping across the UK, Ireland, and Europe. The location from a postcode or ZIP code is an approximate position for the venue area, not an exact swim, bank, or car-park location. To mark a precise spot, manually place or move a pin on the map.

Capture markers and depth pins

A map Capture marker records a catch location; a Depth Marker records a depth reading. A numeric depth alone does not choose a catch location or link a catch to a pin. Check the saved venue and peg, then explicitly choose or confirm the intended depth pin or Capture marker. For the separate named-spot, catch-to-pin and photo relationships, see Fishing spot history and catch pins.

Pin types

When adding a pin, tap and hold on the map at the location you want to mark — a pin is placed. Then choose the pin type and fill in the details. You can also tap Use my GPS location to place the pin at your current position.

Peg / Swim — marks a fishing position. Add a peg number, a name, and any notes. Swim photos can be linked to this peg (see Swim photos below) — once photos are linked a blue camera badge appears on the pin. Tap the pin in View mode to open the photo gallery for that swim or jump to the peg's depth profile. When creating or editing a peg pin, you can also set the swim's facing direction — the compass bearing toward the water. This is required for the automatic depth pin placement feature (see Placing photo depths on the map as pins, below).

Depth Marker — records a water depth at that point. Enter the depth value and an optional pin label (e.g. "Deep gully"). You can also add a location label — a quick description of where the reading was taken (Near margin, 1/3 out, Middle, 2/3 out, Far margin, or Far bank) — so two markers at the same depth can be easily told apart.

Feature — tags a lake or river feature at that point. Choose from: Drop-off, Bar, Plateau, Hump, Snag, Lily Bed, Reed Bed, Island, Weed Bed, and Margin. For Lily Bed pins you can also record colony size (Small, Medium, or Large). Add a name and any notes.

Substrate — records the lakebed material at that point: Gravel, Clay, Silt, or Mud. Helpful for building a picture of the lake floor when plumbing up.

Fish Caught — placed automatically when a catch is logged via the map during a session. Tapping it in View mode links directly to that fish's full catch report.

Editing and moving pins

Tap any pin in View mode to open its detail panel. From there you can:

  • Edit — change the pin type, name, depth, notes, or linked catch.
  • Move — reposition the pin by tapping a new point on the map.
  • Delete — remove the pin entirely.

Drawing lines

Switch to Line mode, tap the start point, then tap the end point on the map to complete the line. Lines display their measured distance and can be customised:

  • Colour — choose from white, yellow, pink, cyan, green, orange, or red.
  • Thickness — Thin, Medium, or Thick.
  • Style — solid or dashed.
  • Label — add an optional label (e.g. "11 wraps" for a casting arc).

Use lines to mark bank shapes, river channels, casting arcs, or the edge of a feature.

Tapping a pin in View mode

Tapping any existing pin opens a detail panel with its recorded data. Depending on the pin type, you may also see:

  • View swim photos — on Peg pins with linked photos. Opens the photo gallery for that swim.
  • View Peg Profile — on Peg pins. Opens the historical depth charts and intel for that peg.
  • View catch — on Fish Caught pins. Opens the full catch record.

Depth Marker pins linked from a peg depth profile show 🔗 Synced from Peg [N] depth profile in the detail panel. Review and explicitly project linked automatic pins when needed; manually placed pins and the peg itself remain under your control.

When a Peg pin is selected, two additional options appear:

Show distance rings — overlays casting-distance rings around the peg in metres or yards according to your selected display preference. Tap Customise distance rings to set your own distances.

Far bank distance — if the map has shoreline data for the venue, the distance to the opposite bank is shown automatically. Use the bearing controls (±5°) to adjust the direction and measure the exact bank you're targeting.

Swim photos and peg mapping

On Fishing Spots, open the selected peg's tagged-photo thumbnail or use View peg photos · [count] photos to browse its peg photos. If none are tagged, choose Browse venue photos, then Go to venue photos to open the venue-wide Photos area and add or tag one. Opening peg photos does not create annotations, depth pins, catch links or named spots. See Fishing spot history and catch pins for how these relationships stay separate.

Link a swim photo to the correct peg to keep its annotations with the right part of the venue.

Add a photo to a peg

  1. Open the saved venue's Photos tab.
  2. Add or edit a swim photo and tag it with the peg number.
  3. Save the photo. It appears in that peg's gallery and can be opened from the peg's map pin.

Add or edit a photo annotation

  1. Open a swim photo from the venue's Photos tab or from a linked peg.
  2. Use the visible photo annotation action. Its control can vary by entry point, so edit mode is not the only way to open it.
  3. Tap the photo to place a pin, then choose a type from the picker sheet.
  4. Press and drag an existing pin to move it. Tap a pin to edit its label, type or depth value; the edit sheet also lets you delete it.

The hint bar reads: "Drag a pin to move · Tap to edit · Tap photo to add".

Photo pin types:

  • Depth — records a depth, cast distance, optional label and location. Locations include Near margin, 1/3 out, Middle, 2/3 out, Far margin and Far bank. Cast distance helps place the reading on the venue map.
  • Catch Spot — marks where a fish was caught within the swim.
  • Snag — marks an underwater snag or obstacle visible in the photo.
  • Feature — marks another notable feature in the image.
  • Margin — marks the margin position.

Review photo depths elsewhere

Photo depth annotations can appear in:

  • The venue's Depths tab, grouped by peg.
  • An active session, where depth readings for the current peg appear as quick-pick chips.

Place photo depth pins on the venue map

CatchMate checks photo readings against saved venue information before offering placement. Automatic placement requires the photo to be linked to the correct saved peg, that peg to have a map position and facing direction, and each photo depth annotation to have a cast distance. Without those details, do not infer peg ownership from a nearby pin; place the pin manually or add the missing information first.

The Place depth pins on map action can be available from the swim photo viewer, the venue's Photos tab, the View Peg Profile sheet, or a session with a matched venue map.

  1. Open the photo or profile from one of those entry points and use the visible Place depth pins on map action.
  2. Review the proposed map position and reading.
  3. Confirm the placement only when the preview matches the swim.

The proposed position uses the peg's facing direction and the annotation's cast distance. It is an organising aid, not a surveyed underwater position. A placed pin linked to a peg profile shows 🔗 Synced from Peg [N] depth profile in View mode. Changing a bearing or anchor does not silently move existing pins: moving linked automatic pins requires a separate confirmation and preview, and manually placed pins are not moved.

Set a cast distance on each depth annotation. An approximate value can help place the pin in roughly the right area, but check the preview before saving.

Using the map during a session

If your session venue matches a saved venue, a Map button appears next to the venue name at the top of the session screen. Tap it to open the venue map while you're on the bank — useful for checking pin locations, reviewing depth readings to help with plumbing up, or logging a catch directly to the map. Tap the back arrow to return to your session.

Map layers and display options

The Wind exposure forecast control expands or collapses its legend. The expanded view explains the wind direction and the shoreline and peg exposure markings:

Expand the forecast legend to read how shoreline and peg wind exposure are represented.

Collapse the legend to see more of the wind-exposure overlay.

Wind from is the source direction; when an arrow is displayed, it points in the direction the wind travels. Shoreline and peg exposure are estimates based on saved map and shoreline evidence. They do not show fish locations, prove that surface water or floating food has moved, predict a catch, or identify a better peg.

The shoreline exposure squares use orange for more exposed and blue for more sheltered areas. Peg rings use fixed distances: orange means at least 500 m of open water; blue means 180 m or less. No ring means the estimate is between those ranges or is unreliable. If reliable shoreline geometry is unavailable, the forecast panel reports that exposure is unavailable and may offer Retry shoreline lookup. Retry the lookup when offered; missing geometry must not be read as sheltered.

Layers button — toggle between standard map view and satellite view. Satellite view is recommended for identifying features and planning casting distances.

Shoreline overlay — toggle the OSM shoreline layer on or off. This outlines the water's edge and is used to calculate far bank distances.

Rotation — use the rotation controls to turn the map to match your view from the bank. Buttons rotate the map left or right 15° at a time; tap Reset to North to return to the default orientation.

GPS — tap Go to my GPS location to centre the map on your current position.

Sharing your map with friends

Open Map Settings from within the venue map.

Shared Map / Private Map toggle — switching to Shared Map makes the map visible to all your CatchMate friends. The label reads "Friends can view this map". Toggle back to Private Map ("Only visible to you") at any time.

Allow pin import toggle — appears when the map is shared. When on, friends can save a full copy of your map including all pins and lines. When off, friends can view the map outline but cannot copy your pins.

Viewing a friend's map

Go to the Social section, open a friend's profile, and tap their shared map to view it. Maps open in a read-only view. If the friend has allowed pin import, you can tap Save to copy the map — and all its pins and lines — into your own Venues.

Tip: Use satellite view when placing pins — bars, margins, and shallow areas are often visible from above, which makes positioning depth markers and feature tags far more accurate.

Last updated: 17 November 2026

Try this in the app

Open CatchMate Coarse on your phone to follow the steps above.

Open CatchMate

Related articles