Swim Depths
Recording swim depths during a coarse session
This article explains how coarse anglers can record swim depths in CatchMate — either per rod or pole line using the inline depth button, or across the whole swim using the Swim Depths panel.
Recording a rod's depth inline
Each rod or pole in your session's rod roster has a small depth button — it shows a wave icon, or the current depth if one is already saved (e.g. "42in" or "1.07m"). Use it to attach a depth reading directly to a specific line.
Coarse anglers can record and review named line depths before using them as a venue peg profile.
Steps
- Open a session (live or historical).
- In the rod roster, tap the Depth button on the rod or pole line you want to record depth for.
- An inline editor appears below that row, labelled Swim depth for this rod.
- If you have a peg profile saved for this venue and peg, a row of chips labelled Load from Peg X appears — tap any chip to pre-fill the depth from your stored profile.
- Enter the depth:
- Metric: type a decimal number in the m box (e.g.
1.07for a metre-plus depth on the 13m line, or0.45for a shallow margin). - Imperial: enter whole numbers in the ft and in boxes separately (e.g.
3in the ft box and6in the in box for three-and-a-half feet).
- Metric: type a decimal number in the m box (e.g.
- To save this reading to the permanent peg profile as well, switch Save to peg profile on and type a label — for example 13m line, 6m line, or Margin.
- Tap Save depth — or Save depth + update Peg X profile if the toggle is on.
What this gives you: The depth is attached to that pole line for the session. If you also saved to the peg profile, the depth marker pins on the venue map update immediately.
Tip: If no peg pin exists on the map yet, a toast appears: "Peg X depth saved — Add a Peg X marker on your venue map to see depths there." Tap Open Map in the toast to go directly to the venue map and drop the pin.
Use a saved marker for the rod setup
While editing the rod's depth in the session, you can select a named depth marker from the peg profile or a swim photo. CatchMate links that marker to an existing venue-map pin only when its name and depth match exactly one pin on the same saved venue and peg. Selecting a map depth pin directly keeps that exact pin identity.
A numeric-only depth, a marker without a usable name, or an ambiguous match does not silently select a pin. Confirm a suggested pin or choose one explicitly. Once saved to this session's rod setup, the pin identity is carried by later casts, and a catch logged against one of those casts inherits it. Changing the rod setup affects later casts and catches; it does not rewrite catches already recorded.
Recording depths across the whole swim
The Swim Depths panel lets you map multiple positions in one go — ideal for plumbing up before the all-in. It includes a bar-chart visualisation of your swim profile.
Steps
- Open a session (live or historical).
- Scroll down to the Swim Depths section and tap Add.
- Choose a position:
- Tap one of the quick-select chips — Near Bank, 6m, 8m, 10m, 11m, 13m, Far Bank — these match typical pole fishing lines exactly.
- Or type a custom label in the Custom position… field (e.g. Island shelf, Snake lake margin).
- Enter the depth:
- Metric: type a decimal in the m box (e.g.
0.76for the 6m line,1.07for the 13m line). - Imperial: enter feet and inches separately (e.g.
3ft and0in for exactly three feet;2ft and6in for two-and-a-half feet).
- Metric: type a decimal in the m box (e.g.
- Tap Add. Repeat for each position — the bar chart updates after every entry.
- When you're done, choose a save option:
- Save to session — stores the depths against this session only.
- Update peg profile — Peg X — saves to the permanent peg profile for this venue and peg, and refreshes the depth marker pins on the venue map.
What this gives you: A visual swim profile showing the lake bed contour across all your lines — and, if you chose "Update peg profile", a permanent depth record ready for every future visit to this peg.
Record water temperature
Water temperature is a separate reading from measured swim or rod depth. In the session's Water temperature section, use Log Reading to enter a measured water temperature manually. The reading is associated with the session and, when that session has a saved peg, with that session peg; the reading form has no separate peg picker. If the session has no saved peg, do not assume peg-specific attribution.
Existing readings and their recorded values and times are retained. Older readings can be associated with the session's saved peg where that information is available; this does not delete or rewrite their values or times.
For planning context and saved recommendations, see Intelligence — understanding your fishing data and Creating and using a session plan.
Live vs historical sessions
There is no functional difference. You can plumb up and record depths in real time during a live session, or add and correct depth records at any time from a historical session. Peg profile updates take effect immediately regardless of when you make them.
Last updated: 17 November 2026
Try this in the app
Open CatchMate Coarse on your phone to follow the steps above.